Item Description:
This controller can be used to start any car appliance after engine is turned off (lost 12V+ signal) for the set time, then go off. The time can be adjusted from 1 to 150 sec.
Specifications:
LED indication for operation of the timer;
Back-voltage protection;
Maximum allowable load (fan) control 12V/15A;
Relay Output with NO contact - the two white wires (no output voltage)
Power supply - DC 12V; red - 12V+ , black - 12V-
Dimensions: 38 mm x 18 mm x 16 mm
With positive lost signal activated input - the orange wire
Method of work:
Red and black wire is connected to permanent 12V, trough fuse 1A. When timer is wired for the first time - it will make the first cycle without activating. Orange wire is connected to contact switch, to get positive signal when engine is turned on. The two white wires are Normally open contact of the relay and can be used in any circuit to turn on car appliance up to 15A.
Package contents:
1. Car timer
2. Instruction for use and wiring diagram.
